Advertisement
7. Level 2 Repair
7-5. Assembly
1
Attach Sub PBA on Front Ass'y.
※ Caution
Be care of Sub PBA damage.
3
Attach Motor and Receiver in upper area.
※ Caution
Be care of damage each part.
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
2
Assemble C to C FPCB and COAXIAL CABLE
Assmble OCTA/
CABLE.
※ Caution
1) Be careful not to damage the C to C FPCB and Red COAXIAL
CABLE.
2) Be careful not to damage the PBA
4
Assemble the PBA and C to C FPCB and Batt
Conn and COAXIAL CABLE and VT
Camera/Macro Camera/Vokeh Cam.
※ Caution
1) Be care of scratch CAM lens.
2) Check for each connector connection.
C to C
Conn.
and COAXIAL
Advertisement
