Hyundai Kona Hybrid 2023 Owner's Manual page 201

Reverse parking aid user settings
mode
You may change the angle of the outside
rearview mirror if it is difficult to see the
rearview with the basic downward mirror
angle provided when reversing.
When the vehicle is first delivered, the set
downward angle of the left and right
outside rearview mirror are different to
ensure driver visibility.
1. Make sure the vehicle is stopped.
2. Depress the brake pedal and shift the
gear to R (Reverse). When L or R switch
is pressed, both outside rearview mirror
angle will move downward to the basic
set position.
3. Press either L or R switch to select the
outside rearview mirror you would like
to adjust. Then press " , , , " switch
to adjust the outside rearview mirror to
the desired angle.
4. After adjusting the angle to save the
adjusted outside rearview mirror angle,
shift the gear to another position other
than R (Reverse), or change the L and R
switch to the neutral position (L and R
switch is not pressed).
5. Set the other outside rearview mirror
following the above procedure 1 to 4.
Resetting reverse parking aid user settings
mode
To change the outside rearview mirror
angle back to the basic angle, shift the
gear to R (Reverse), and adjust the mirror
angle higher than when the gear is in P
(Park), N (Neutral) and D (Drive).
NOTICE
When changing the angle of both outside
rearview mirrors, it is recommended to
change the angle one side at a time
following the procedure 1 to 4.
5
5-39