Hyundai Kona Hybrid 2023 Owner's Manual page 110

Seats & Safety system
Securing a Child Restraint System
seat with Top Tether Anchorage
system
2C_ALRSeatBeltTetherAnchor
First secure the child restraint with the
ISOFIX anchorages or the seat belt. If the
child restraint manufacturer
recommends that the top tether strap be
attached, attach and tighten the top
tether strap to the top tether strap
anchorage.
Top tether anchorages are located on the
rear of the seatbacks.
2C_ALRSeatBeltInstall
To install the top tether anchor:
1. Route the Child Restraint System top
tether strap over the seatback. Route
the tether strap under the headrest and
between the headrest posts, or route
the top tether strap over the top of the
vehicle seatback. Make sure the strap is
not twisted.
3-42
2. Connect the top tether strap hook to
the top tether anchorage, then tighten
the top tether strap according to the
instructions of your Child Restraint
System's manufacturer to firmly secure
the Child Restraint System.
3. Check the Child Restraint System is
secure by pushing and pulling the seat
forward and back and side-to-side.
WARNING
Take the following precautions when
installing the top tether anchorage:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• Never attach more than one Child
Restraint System to a single ISOFIX top
tether anchorage. This could cause the
anchorage or attachment to come
loose or break.
• Only attach the top tether strap to the
correct top tether anchorage for that
seating position.
• Child Restraint System anchorages are
designed to withstand only those loads
imposed by correctly fitted Child
Restraint System.
Under no circumstances are they to be
used for adult seat belts or harnesses or
for attaching other items or equipment
to the vehicle.