Table of Contents
Advertisement
DIVAR IP all-in-one 7000 2U
3.4
Hard drive carrier LEDs
The chassis supports hot-swappable SAS/SATA hard drives in hard drive carriers. Each hard
drive carrier has two LEDs on the front of the carrier: one activity LED and one status LED.
Note: For non-RAID configurations, some LED indications are not supported, for example hot
spare.
LED color
Green
Red
3.5
Power supply LEDs
On the rear of the power supply module, an LED displays the status.
LED color
Green
Amber
Bosch Security Systems B.V.
LED state
On
Blinking
On
LED state
Solid On
Solid On
Blinking
Installation manual
Description
Drive activity
Drive is being accessed.
Drive failure
Description
Power supply is on.
The power supply is plugged in and turned off
or
The system is off but in an abnormal state.
The system power supply temperature has
reached 63 °C.
The system will automatically turn off when the
power supply temperature reaches 70 °C and
restart when the power supply temperature goes
below 60 °C.
System overview | en
17
2021.03 | V2 | DOC
Advertisement
Table of Contents
