Separating The Sections Of The Rack Rails; Installing The Inner Rails On The Chassis - Bosch DIP-7280-00N Installation Manual

20 en | Rack installation
4.3.1

Separating the sections of the rack rails

The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of two sections:
–
–
To separate the inner and outer rails:
1.
2.
3.
4.
4.3.2

Installing the inner rails on the chassis

The chassis includes a set of inner rails in two sections: inner rails and inner rail extensions.
The inner rails are pre-attached to the chassis, and do not interfere with normal use of the
chassis if you decide not to use a server rack. The inner rail extension is attached to the inner
rail to mount the chassis in the rack.
Caution!
Do not pick up the chassis with the front handles. They are designed to pull the system from
!
a rack only.
2021.03 | V2 | DOC
an inner fixed chassis rail that secures directly to the chassis
an outer fixed rack rail that secures directly to the rack itself.
Locate the rail assembly in the chassis packaging.
Extend the rail assembly by pulling it outward.
Press the quick-release tab.
Separate the inner rail extension from the outer rail assembly.
Installation manual
DIVAR IP all-in-one 7000 2U
Bosch Security Systems B.V.