Installing A Hard Drive Into A Hard Drive Carrier - Bosch DIVAR IP 6000 Series Installation Manual

36 en | Maintenance
The unit features hot-swappable hard drives which can be removed without powering down
the system.
2
To remove a hard drive from the chassis:
1.
2.
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
10.4.2

Installing a hard drive into a hard drive carrier

The hard drives are mounted in hard drive carriers.
To install a hard drive into a hard drive carrier:
1.
2016.08 | V2.1 | DOC
1
1 Release button
Press the release button to the right of the hard drive carrier. This extends the hard drive
carrier handle.
Use the handle to pull the drive out of the chassis.
Remove the screws securing the dummy drive to the hard drive carrier.
2
Installation Manual
DIVAR IP 6000 (3U)
Hard drive carrier handle
Bosch Sicherheitssysteme GmbH