JVC KW-X850BTS Instruction Manual page 35

Digital media receiver
Hide thumbs Also See for KW-X850BTS:
Table of Contents

Advertisement

Audio Settings
[X ' OVER TYPE]
Caution: Adjusts the volume before changing the [X ' OVER TYPE] to avoid
the sudden increase or decrease of the output level.
• Once you have changed the crossover type, the next time when you turn
on the power, the display shows:
"2-WAY X'OVER" or "3-WAY X'OVER"
"TO CONFIRM"
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
[2-WAY]
(Displayed only when [3-WAY] is selected.)
[YES]: Selects two way crossover type. ; [NO]: Cancels.
[3-WAY]
(Displayed only when [2-WAY] is selected.)
[YES]: Selects three way crossover type. ; [NO]: Cancels.
[SOUND EFFECT]
[SPACE ENHANCE] (Not applicable for FM/AM source.)
[SMALL]/[MEDIUM]/[LARGE]: Virtually enhances the sound space. ;
[OFF]: Cancels.
[SND RESPONSE]
[LEVEL1]/[LEVEL2]/[LEVEL3]: Virtually makes the sound more realistic. ;
[OFF]: Cancels.
[SOUND LIFT]
[LOW]/[MIDDLE]/[HIGH]: Virtually adjusts the sound position heard from
the speakers. ; [OFF]: Cancels.
[VOL LINK EQ]
[ON]: Boosts the frequency to reduce the noise heard from outside the car
or running noise of the tyres. ; [OFF]: Cancels.
[K2 TECHNOLOGY] (Not applicable for FM/AM source, SIRIUS XM source and AUX source.)
[ON]: Improves the sound quality of compressed music. ; [OFF]: Cancels.
Speaker output settings
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY])
Select the output setting for the speakers [SPK/PRE OUT], based on the speaker
"PRESS"
"VOLUME KNOB"
connection method.
For connections through an external amplifier (Page 43)
Setting on
[SPK/PRE OUT]
[REAR/REAR] (default) Front speakers
[SUB.W/SUB.W]
You can also connect the speakers without using an external amplifier
but still being able to enjoy the subwoofer output with these settings.
(Page 42)
Setting on
[SPK/PRE OUT]
[REAR/REAR]
[SUB.W/SUB.W]
If [SUB.W/SUB.W] is selected:
– [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
(Page 31)
– [POSITION R02] is selected in [FADER] and selectable range is [POSITION R15] to
[POSITION 00]. (Page 28)
[SPK/PRE OUT]
Connection via lineout terminals
Audio signal through lineout terminal
FRONT
output
Front speakers
output
Connection via speaker leads
Audio signal through rear speaker lead
L (left)
Rear speakers output
Subwoofer output
REAR
SW
Rear speakers output
Subwoofer output
L (left): Subwoofer output
Subwoofer output
R (right): (Mute)
R (right)
Rear speakers output
(Mute)
ENGLISH
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-x855btsKw-r950bts

Table of Contents