Adjustments; Adjust Seat; Adjust Steering Levers - Ariens EDGE 34 Operator's Manual

ADJUSTMENTS

WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.

ADJUST SEAT

1. Tip the seat forward.
2. Loosen the two wing knobs located
toward the front of the seat plate. See
Figure 15.
Figure 15
3. Move seat to desired position.
4. Tighten wing knobs.
5. Return seat to operating position.

ADJUST STEERING LEVERS

Adjust Steering Lever Height
See Figure 16.
1. Remove hardware securing steering
lever to upper control arm.
2. Place steering lever in desired adjusting
hole.
• Use upper and middle holes for highest
lever position.
• Use middle and lower holes for lowest
lever position.
3. Reinstall hardware in upper control arm.
4. Align levers side to side. See Adjust
Steering Level Reach on page 18.
5. Fully tighten hardware.
3
1. Adjusting Hole
2. Mounting Hole
3. Steering Lever
4. Upper Control Arm
See Figure 17.
6. Loosen lock nut on height-adjustment
bolt.
7. Turn bolt in or out until levers are at the
same height.
8. Tighten lock nut.
1. Lock Nut
2. Height-adjuster Bolt
EN - 17
4
1
2
Figure 16
2
1
Figure 17