Maintenance
Service Operation
Chipped Surfaces—paint
* More often in dusty, dirty conditions
Air Cleaner
Service Interval/Specification
Foam Element: Clean and re-oil after every 25
operating hours, or yearly, whichever occurs first.
Paper Element: Replace after every 100 operating
hours or yearly, whichever occurs first.
Note:
Service the air cleaner more frequently
(every few hours) if operating
conditions are extremely dusty or
sandy.
Removing the Foam and Paper Elements
1.
Disengage the power take off (PTO), set the
parking brake, lower the attachment lift, and turn
the ignition key to "STOP" to stop the engine.
Remove the key.
2.
Open the hood.
3.
Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage.
Unhook the latches and remove the air cleaner
cover (Fig. 22).
24
Each
5
25
Use
Hours
Hours
1
3
7
1. Air cleaner cover
2. Knob
3. Cover nut
4. Cover
4.
Carefully slide the foam element off the paper
element (Fig. 22).
5.
Unscrew the cover nut and remove the cover and
paper element (Fig. 22).
50
100
200
Hours
Hours
Hours
2
4
5
6
8
Figure 22
5. Foam element
6. Paper element
7. Rubber seal
8. Air cleaner base
Storage
Service
X
m–3214