Check The Engine Oil Level - Toro Wheel Horse 73560 Operator's Manual

Check the Engine Oil Level

1. Park the machine on a level surface, disengage
the power take off (PTO), set the parking brake,
lower the attachment lift, and turn the ignition
key to "STOP" to stop the engine. Remove the
key.
2. Open the hood.
3. Clean around the oil dipstick (Fig. 4) so dirt
cannot fall into the dipstick tube and damage the
engine.
4. Pull out the oil dipstick and wipe the metal end
clean (Fig. 5).
5. Slide the oil dipstick fully into the dipstick tube
(Fig. 4). Pull the dipstick out and look at the
metal end. If the oil level is low, add oil; refer to
Engine Oil, page 26.
IMPORTANT: Do not overfill the crankcase
with oil because this may result in engine
damage.
2
Figure 4
1. Dipstick
1
m–3246
2. Oil filler
1
Figure 5
1. Metal end
Check Before Operating
m–3219
11