Lowering Attachments; Positioning The Seat; Headlights And Taillights - Toro Wheel Horse 73560 Operator's Manual

Table of Contents

Advertisement

Operation
POTENTIAL HAZARD
When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
Someone nearby may be pinned or injured
by the attachment as it lowers.
HOW TO AVOID THE HAZARD
Always lower the attachment lift each time
you shut off the tractor.

Lowering Attachments

1.
Start the tractor.
2.
Push the lift lever DOWN to lower the
attachment (Fig. 17).
Figure 17
1. Lift lever–Up
20
1
2
m–3315
2. Lift lever–Down

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1.
To adjust, move the lever sideways to unlock
seat (Fig. 18).
2.
Slide the seat to the desired position and release
the lever to lock the seat into position.
1
Figure 18
1. Adjustment lever

Headlights and Taillights

The headlights and taillights are turned on by turning
the ignition key to the LIGHTS position. They can
be turned on even if the engine is not running.
Remove the key when leaving the machine
unattended so that the headlights cannot be turned on
and discharge the battery.
Figure 19
1. Lights
m–3320
1
m–3312

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wheel horse 522xiWheel horse 520xiWheel horse 73540

Table of Contents