Installing Drive Roll And Wire Inlet Guide; Electrical Service Guide - Miller Electric INTEGRA 151S Owner's Manual

2-5. Installing Drive Roll and Wire Inlet Guide

3

2-6. Electrical Service Guide

Input Voltage
Input Amperes at Rated Output
Max Recommended Standard Fuse or Circuit Breaker Rating in Amperes
** Input Conductor Size in mm
** Grounding Conductor Size in mm
** Power cord supplied with the unit is sized for 230V operation. Larger power cord may be required for cable lengths greater than 3 meters. C
onsult national and local regulations.
5
2
4
1
2
2
1 Securing Screw
2 Inlet Wire Guide
Loosen screw. Slide tip as close to
drive rolls as possible without touch-
ing. Tighten screw.
3 Wire Tension Wheel
4 Drive Roll
Install correct drive roll for wire size
and type.
5 Drive Roll Tension Assembly
Turn nut one click to secure drive
roll.
ST-150 227-C
151
230
25
25
4
4
OM-189 107 Page 7