KTM F5303U5 2021 Owner's Manual page 98

8 ERGONOMICS
96
–
Detach spring
–
Loosen nut
Tip
Press the foot brake lever downwards to make this eas-
ier.
–
Turn the push rod
brake lever.
Info
The range of adjustment is limited.
The screw must be screwed in by at least five full turns.
Screwing the push rod into the ball joint adjusts the
foot brake lever downwards.
Screwing the push rod out of the ball joint adjusts the
brake lever upwards.
–
Loosen nut
A
free travel
A00707-10
tion of the foot brake lever.
Guideline
Free travel at foot brake lever 3 ... 5 mm (0.12 ... 0.2 in)
–
Hold screw
1
.
2
.
3
to set the basic position of the foot
4 5
and turn screw correspondingly until the
is present. If necessary, adjust the basic posi-
5 4
and tighten nut .