–
Remove screws
–
Take off the handlebar clamps
place to one side and secure.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove screws
–
Place handlebar supports
Info
The handlebar supports are longer and higher on one
side.
Position the left and right handlebar supports evenly.
–
Mount and tighten screws
Guideline
Screw, handlebar
S04167-10
support
1
.
2
. Take off the handlebar,
3
. Take off handlebar supports
4
in the required position.
3
.
M10
40 Nm (29.5 lbf ft)
ERGONOMICS 8
4
.
89