Table of Contents
Advertisement
Warning
Danger of accidents ABS may increase the stopping distance in certain situations.
–
Adjust application of the brakes to the respective riding situation and riding surface conditions.
–
When braking, release the throttle and apply the front and rear brakes at the same time.
Info
When the ABS is enabled, maximum braking power can be achieved even with low road grip surfaces
such as sandy, wet, or slippery terrain without locking the wheels.
Warning
Danger of accidents The rear wheel can lock due to the engine braking effect.
–
Pull in the clutch, if you perform emergency or full braking, or if you brake on a slippery ground.
Warning
Danger of accidents Banked or laterally sloping ground reduces the maximum possible delay.
–
If possible finish braking before going into a bend.
–
Always finish braking before you go into a bend. Shift down to a lower gear appropriate to your speed.
–
Use the braking effect of the engine on long downhill stretches. Shift back one or two gears, but do not over-
rev the engine when doing so. This means that significantly less braking is required and the brake system
does not overheat.
RIDING INSTRUCTIONS 10
117
Advertisement
Table of Contents
