–
Clean the thread of the wheel spindle and screw
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed
sensor holder
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
S04157-11
point.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 134)
–
Operate the front brake and compress the fork a few times
firmly.
WHEELS, TIRES 15
2
p. 266)
2
.
M8
25 Nm (18.4 lbf ft)
3
in the hole.
4
.
M6
8 Nm (5.9 lbf ft)
p. 137)
.
179