DRIVER SUPPORT
Limitations of BLIS
76
The BLIS
function may have limitations in cer-
tain situations.
Keep the surface indicated clean – on both the left and
77
right-hand sides of the car
.
Examples of limitations:
Dirt, ice and snow covering the sensors may
•
reduce the functions and deactivate alerts.
The BLIS function is automatically deacti-
•
vated if a trailer, bicycle rack or similar is con-
nected to the car's electrical system.
For optimal performance of BLIS, no bicycle
•
rack, luggage carrier or similar should be
mounted on the car's towbar.
76
Blind Spot Information
77
NOTE: The illustration is schematic - details may vary depending on car model.
NOTE: The illustration is schematic - details may vary depending on car model.
78
368
WARNING
BLIS does not work on sharp bends.
•
BLIS does not work when the car is
•
reversing.
Related information
BLIS* (p. 366)
•
Recommended maintenance for
BLIS
To ensure optimal functionality, the surfaces
•
in front of the sensors must be kept clean.
Do not affix any objects, tape or labels in the
•
area of the sensors.
Keep the surface indicated clean – on both the left and
78
right-hand sides of the car
.
The sensors for BLIS are located inside each
corner of the rear wing/bumper. The sensors are
also used by the Cross Traffic Alert (CTA) and
Rear Collision Warning functions.
* Option/accessory.