Volvo V90 TWIN ENGINE Owner's Manual page 330

DRIVER SUPPORT
|| Hands on the steering wheel
In order for Pilot Assist to function, the driver's
hands must be on the steering wheel.
If Pilot Assist detects that the
driver is not holding the steer-
ing wheel, the driver is promp-
ted after a pause to actively
steer the car, via a symbol and
a text message.
If the driver's hands still cannot be detected on
the steering wheel after a few seconds, the
prompt to actively steer the car is repeated, sup-
plemented by an acoustic warning signal.
If Pilot Assist cannot detect the driver's hands on
the steering wheel after a further few seconds,
the warning signal becomes intensive and the
steering function is deactivated. Pilot Assist must
then be restarted using the steering wheel button
.
NOTE
Note that Pilot Assist only works when the
driver has hands on the steering wheel.
Related information
Pilot Assist (p. 322)
•
328
Managing speed for Pilot Assist
Pilot Assist can be set to different speeds.
Setting/changing the stored speed
NOTE: The illustration is schematic - details may vary
depending on car model and market.
: Increases the stored speed
: Reduces stored speed
Stored speed
Change a set speed with short presses on
–
the steering wheel buttons
(2) or by pressing and holding them.
Short presses: Each press changes the
•
speed in increments of +/- 5 km/h
(+/- 5 mph).
Press and hold: Release the button when
•
the speed indicator (3) has moved to the
desired speed.
The speed set after the last button press is
•
stored in the memory.
If the driver increases the car's speed using the
accelerator pedal before pressing the steering
wheel button (1), the speed stored will be
the car's speed when the button is depressed,
provided the driver's foot is on the accelerator
pedal at the moment when the button is
depressed.
A temporary increase in speed with the accelera-
tor pedal, e.g. during overtaking, does not affect
the setting - the car returns to the last stored
speed when the accelerator pedal is released.
(1) or