Volvo V90 TWIN ENGINE Owner's Manual page 319

Table of Contents

Advertisement

WARNING
When the adaptive cruise control is following
another vehicle at speeds in excess of
approx. 30 km/h (20 mph) and the target is
changed from a moving vehicle to a stationary
vehicle, the adaptive cruise control will ignore
the stationary vehicle and instead accelerate
to the stored speed.
The driver must then intervene him/
herself and brake.
Automatic standby mode with change of
target
The adaptive cruise control is disengaged and set
in standby mode:
when the speed is below 5 km/h (3 mph)
and the adaptive cruise control is uncertain
whether the target object is a stationary vehi-
cle or some other object, such as a speed
bump.
when the speed is below 5 km/h (3 mph)
and the vehicle ahead turns off so the adap-
tive cruise control no longer has a vehicle to
follow.
Related information
Adaptive cruise control* (p. 306)
Adaptive Cruise Control
50
Automatic braking with adaptive
cruise control
The Adaptive cruise control (ACC
cial brake function in slow traffic and while sta-
tionary.
Brake function in slow queues and
while stationary
For shorter stops in connection with inching in
slow traffic or at traffic lights driving is automati-
cally resumed if the stops do not exceed about
3 seconds - if it takes longer before the car in
front starts moving again then the adaptive cruise
control is set in standby mode with automatic
braking.
The Adaptive Cruise Control is reactivated in
one of the following ways:
Press the steering wheel button
Depress the accelerator pedal.
> The Adaptive Cruise Control resumes fol-
lowing the vehicle ahead if it starts mov-
ing forward within 6 seconds.
NOTE
ACC can keep the car stationary for a maxi-
50
) has a spe-
mum of 5 minutes. After this the parking
brake is applied and adaptive cruise control is
disengaged.
The parking brake must be released before
the adaptive cruise control can be reactivated.
Cessation of automatic braking
In some situations, automatic braking ceases on
reaching 0 km/h and Adaptive Cruise Control is
set in standby mode. This means that the brakes
are released and the car may start to roll - the
driver must therefore intervene and brake the car
himself/herself to keep it stationary.
This may take place in the following situations:
.
the driver puts his/her foot on the brake
pedal
the parking brake is applied
the gear selector is moved to P, N, or R posi-
tion
the driver sets the adaptive cruise control in
the standby mode.
Automatic activation of parking brake
In certain situations the parking brake is applied
to keep the car stationary.
DRIVER SUPPORT
}}
317
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents