Volvo V90 TWIN ENGINE Owner's Manual page 300

DRIVER SUPPORT
||
WARNING
The cruise control function is supplemen-
•
tary driver support intended to facilitate
driving – it cannot handle all situations in
all traffic, weather and road conditions.
The driver is advised to read all sections
•
in the Owner's Manual that relate to this
function to learn about factors such as its
limitations and what the driver should be
aware of before using the system (see
the list of links at the end of this article).
Cruise control is not a substitute for the
•
driver's attention and judgement. The
driver is always responsible for ensuring
the car is driven in a safe manner, at the
appropriate speed, with an appropriate
distance to other vehicles, and in accord-
ance with current traffic rules and regula-
tions.
Related information
Activating and starting Cruise Control
•
(p. 298)
Managing speed for the cruise control
•
(p. 299)
Deactivate Cruise Control and set it in
•
standby mode (p. 300)
Reactivating Cruise Control from standby
•
mode (p. 301)
Deactivating cruise control (p. 301)
•
298
Change between Cruise control and adaptive
•
cruise control (p. 319)
Activating and starting Cruise
Control
23
The cruise control function (CC
selected and activated in order to be able to reg-
ulate the speed.
NOTE: The illustration is schematic - details may vary
depending on car model.
Set cruise control in standby mode
To set cruise control in standby mode:
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function (4).
> The symbol is shown and the cruise con-
trol can then be activated.
Activating/starting cruise control
In order to start the Cruise control from the
standby mode, the car's current speed must be
) must first be