Volvo V90 TWIN ENGINE Owner's Manual page 292

DRIVER SUPPORT
Activating and starting the Speed
Limiter
The speed limiter function (SL
selected and activated in order to be able to reg-
ulate the speed.
Set the speed limiter in standby mode
NOTE: The illustration is schematic - details may vary
depending on car model.
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function for speed limiter
> Symbol (4) is shown and the speed limiter
is set in standby mode.
Start the Speed Limiter
The speed limiter cannot be activated until after
the engine has been started. The lowest maxi-
12 Speed Limiter
Speed Limiter
13
290
mum speed that can be stored is 30 km/h
(20 mph).
12
When the speed limiter is in standby mode
) must first be
–
and the
steering wheel button
> The Speed Limiter starts and the current
speed is stored as the maximum speed.
Related information
Speed Limiter (p. 289)
•
(4).
symbol is shown - press the
(2).
Managing speed for the speed
limiter
13
The speed limiter (SL ) can be set to different
speeds.
Setting/changing the stored speed
NOTE: The illustration is schematic - details may vary
depending on car model.
Change a set speed with short presses on
–
the steering wheel buttons
(3) or by pressing and holding them.
Short presses: Each press changes the
•
speed in increments of +/- 5 km/h
(+/- 5 mph).
Press and hold: Release the button when
•
the set speed indicator (4) has moved to
the desired speed.
(1) or