Print Reduction Setting - Toshiba e-studio 191F Operating Instructions Manual

Receiving Documents
Original Document Order

Print Reduction Setting

Automatic Reduction
Based on the document length, your machine will automatically calculate the suitable reduction ratio (70%
to 100%). Set Fax Parameter No.24 (PRINT REDUCTION) to "2:Auto". (See page 154)
Fixed Reduction
Pre-determine the reduction ratio from 70% to 100% in 1% increments.
• a) Set Fax Parameter No.24 (PRINT REDUCTION) to "1:Fixed". (See page 154)
• b) Set Fax Parameter No.25 (REDUCTION RATIO). (See page 154)
Ex: A4 to A4 96%
A4 to Letter 90%
Letter to Letter 96%
If the received document is extremely long (over 39% longer than the recording paper), the document is
divided into separate pages. When printing on separate pages, the bottom 0.4 in (10 mm) of the 1st page's
data will overlap.
32
1
2
3
Transmitted Document
Oversized Document
Copy Output Order
Correct Order Stacking
(Collation Mode)
1
2
3
Received Document
Reduced to fit the loaded paper size
Reverse Order Stacking
(Non-Collation Mode)
3
2
Overlap print.
10 mm
1