Basic Operating Procedure; Turning The Camera On/Off - Rollei dt4000 User Manual

Rollei dt4000: user guide

Hide thumbs Also See for dt4000:

Table of Contents

Basic Operating Procedure

This section provides simple and basic directions to get you started with

your camera. From this section, you will learn how to turn the camera on

and off, shoot pictures, zoom In and Out, set your flash, and playback

your pictures.

To turn the camera on, slide the lens barrier to the direction of the arrow. If the

lens does not extend when the lens barrier is opened, there is a possibility that

it is not fully open. Fully slide the barrier until you hear a click.

To turn the camera off, slighly close the lens barrier until it touches the lens

barrel. Once they make contact, the lens will retract. Please wait until the lens

is fully retracted before closing the lens barrier. The backside LED indicator will

remain green while the power is turned on.

User can directly turn on playback mode while the slide remains closed.

Please refer to page 17 for detailed operation.

NOTE:

Lens Barrier Lens Barrier

Do not forcefully push the lens barrier against the lens as this

may damage the lens or cause it to malfunction.

Basic Operating Procedure

E N

Table of Contents