Table of Contents
Advertisement
•
FLASH Setting
1.To set the Flash, press the Five-Way Switch to the Left to select the
desired Flash setting. You will have the four types of Flash settings:
Flash Off, Auto Red-eye reduction, Flash Force On, and Night. Once
you've set your Flash setting, proceed with your picture taking.
Flash Off
Auto Red-eye
reduction
Flash Force On
Night (Slow)
•
Self Timer
To set the self timer under the capture mode, please press Five-Way
Switch to the Right once to activate the self timer. You will have
ten seconds to get ready for your pose. The countdown number will be
displayed on the LCD as well followed by a beep sound.
•
Shooting Continuously Setting
Pictures can be shoot in successive orders.
1.
Keep pressing the right button twice until Shooting Continuously icon appears
on the LCD Display.
2.
Keep pressing the shutter button to activate Shooting Continuously. Then
release the shutter after the three sequences have been taken.
13
The Flash will not fire.
The Flash will fire depending
on the light source. Red eye
reduction will also be active
when needed. (Flash will
blink twice, picture will be
shot when the second flash is
fired.)
The Flash always fires with
every shot.
The camera extends the
mechanical shutter action,
and allows flash delay.
Advertisement
Table of Contents
