Loading the battery and SD Card
This camera uses a Li-ion battery. The battery and SD card share the same compart-
.
ment and door
CAUTION!
3
Battery Power Status
Full
Middle
Low
Empty
1.
Fully charge the battery before its first use.
2.
To improve battery performance, replace installed
battery at the same time and keep away from heat.
3.
To discard battery, refer to the index of the battery
manufacturer.
4.
Battery should be inserted in the battery compart-
ment with the "+" and "-" sides facing correctly.
5.
For alternative power source, the optional AC-
Adapter kit is available.
1.Slide the battery/SD Card cover in
the direction of the arrow, then lift to
open.
2.Load the included battery in the
compartment.
3.Insert the SD card into the slot.
4.Close the cover.