Displaying Thumbnails - Rollei dt4000 User Manual

Rollei dt4000: user guide
Hide thumbs Also See for dt4000:
Table of Contents

Advertisement

User can directly turn on playback mode while the sliding door remains
closed.
1.
Press the LCD button for about 2 seconds to power on DSC (playback mode
only)
2.
Use the 5 ways function & Zoom button to view the images that have been
taken.
3.
Erase and protect function setting is available.
4.
If there are no images in memory, LCD will display "No data in internal mem-
ory!", and format function will be the only function available to users.
5.
Press the LCD button again to power off the DSC.

Displaying Thumbnails

1.
Turn the Mode Dial to Playback Mode.
2.
Press the display button twice to view thumbnails in sets of nine.
3.
Use the Five-Way Switch to change the image selection.
4.
Press OK button to magnify images to standard size.
5.
Press the left or right button to view other images.
Display with Digital Zoom
The camera has 4x digital zoom.The picture can be zoomed up to four
times the original size. The five-way switch controls left, right, up, and
down of the image. Press the OK button to quit Digital Zoom Display.
1.
Turn the MODE DIAL to Playback Mode.
2.
To enter/exit Playback Mode Setup, press the Menu button.
3.
While you are in the Playback Mode menu setting, use the Five-Way Switch to
select.
17

Advertisement

Table of Contents
loading

Table of Contents