Majestic TRILLIANT30IN Owner's Manual page 16

CAUTION! Risk of burns! Appliance surfaces are hot
when operating and during cool down. Use care and
wear gloves when opening the front and accessing com-
ponents inside the appliance.
- Toggle the appliance reset switch to the off position.
See Figure 3.9 for reset switch location.
or
- Set the IFT-ECM 3-position selector switch to OFF
position.
- Wait five (5) minutes to allow possible accumulated
gas to clear.
- Toggle the appliance reset switch to the on position.
or
- Set the IFT-ECM 3-position selector switch to ON or
REMOTE position. Module will beep once and flash a
three GREEN LED code on successful startup.
If placed in ON position, the appliance will ignite
normally if the error condition was corrected.
If placed in IFT-REM position or reset switch used, use
the paired IFT-RC400, IFT-RC150 or wired wall switch
to start the appliance; appliance will ignite normally if the
error condition was corrected.
If the IFT-ECM re-enters the lock-out condition after these
steps, call your dealer for service.
Figure 3.9 Surround Reset Switch
Majestic • TRILLIANT25IN, TRILLIANT30IN, TRILLIANT35IN Owner's Manual • 2571-981 Rev. B • 5/23
16
SURROUND
RESET SWITCH
Appliance ON/OFF:
A wall control, thermostat or remote control may be used
to control the ON/OFF function of the appliance. Follow
instructions included with the installed control. Contact
your dealer for details.
Fan Kit
• This appliance includes a factory installed fan.
• Fan functions are integrated into the included IFT-
RC400 remote control.