Preparations
Connecting Audio System, or Amp
The internal sounds of the SPD-6 will be output in monaural.
1
Before making connections, turn off the power of all devices.
To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
2
Use an audio cable to connect the [OUTPUT] jack(s) on the rear panel of the SPD-6
to the input jack(s) of your audio system or amp.
If using one monaural cable to make connections, connect the SPD-6's [OUTPUT] 2
(MONO) jack to the "MONO" jack of your audio system or amp.
fig.2-1a.e
When using one cable for connections
SPD-6
OUTPUT
Connecting Headphones
1
Connect headphones to the [OUTPUT] 1 (PHONES) jack on the rear panel of the
SPD-6.
fig.2-2.e
14
Audio cables
When using two cables for connections
Audio system
INPUT
R L(MONO)
Audio cable
Audio system or amp
SPD-6
Audio system
OUTPUT
INPUT
R
L
Audio cables
If you are using headphones,
do not connect anything to the
[OUTPUT] 2 (MONO) jack.