Table of Contents
Advertisement
Problem
I cannot find the SpaceLink Home Gateways using the SpaceLink Home Gateway
Discovery.
Solution
To configure the SpaceLink Home Gateway through a wireless LAN card,
your computer must be in the same subnet of the SpaceLink Home Gateway.
You cannot find the SpaceLink Home Gateways with subnet different from
your computer within the same gateway. You must change your computer
to the same subnet as the SpaceLink Home Gateway. The factory default
subnet of the SpaceLink Home Gateway is "192.168.123.1".
In Windows NT/2000/XP, you must login with Administrator privi-
leges so that all functions of the SpaceLink Home Gateway Man-
ager can function correctly. If you do not login as a member of the
Administrator group, you cannot change IP settings but can still
run the Discovery utility if the original IP setting is correct.
Problem
How do I upgrade the firmware on the SpaceLink Home Gateway?
Solution
Periodically, a new Flash Code is available for the SpaceLink Home
Gateways on the ftp site at ftp://ftp.asus.com. Ideally, you should update
the SpaceLink Home Gateway's Flash Code using "Firmware Upgrade"
on the "Advanced Setup" menu of the web manager.
Chapter 5 -Troubleshooting
SpaceLink Home Gateway
69
Advertisement
Table of Contents
