Table of Contents
Advertisement
Chapter 3 - Home Gateway Utilities
Firmware Restoration
This utility will automatically search out failed SpaceLink Home Gateways
and upload a firmware that you specify. The process takes about 3 to 4
minutes and during this process the PWR, AIR, and WAN LEDs will remain
lit while the LAN LED will flash slowly.
The Firmware Restoration utility is an emergency rescue tool to restore a
SpaceLink Home Gateway which has failed during a previous firmware
upload. A failed firmware upgrade will cause the SpaceLink Home Gateway
to enter a failure mode, waiting for the user to use the Firmware Restoration
utility to find and upload a new firmware. This is not a firmware upgrade
utility and cannot be used on a working SpaceLink Home Gateway. Normal
firmware upgrades must be done through the web manager.
Using a Hub
If you have problems upload a firmware while using a network hub, try
connecting your computer directly to the LAN port. Either 10Base-T or
100Base-TX connections will work.
SpaceLink Home Gateway
55
Advertisement
Table of Contents
