Table of Contents
Advertisement
4. LAN Connection: Attach one end of an RJ-45 Ethernet cable to the
SpaceLink Home Gateway's LAN port (any one of the four) and attach
the other end to the RJ-45 Ethernet cable to your desktop computer.
5. Power Connection: The SpaceLink Home Gateway requires power
from an external power supply. The SpaceLink Home Gateway ships
with a UL listed, Class 2 power supply (5V, 2A). Attach one end of the
DC power adapter to the back of the SpaceLink Home Gateway and the
other end to a power outlet.
The Power LED on the front of the Home Gateway will light up when
the unit is powered ON. In addition, the green LAN or WAN LEDs will
turn ON to indicate that the Home Gateway has a physical Ethernet
network connection.
Note: Use the Home Gateway only with the power adapter supplied
in the product package. Using another power supply may damage
the Home Gateway.
6. Printer Connection: If you plan to use the home gateway as a printing
server for your local network, connect a printer to the printer port of the
home gateway via a printer cable.
Chapter 2 - Installation
SpaceLink Home Gateway
21
Advertisement
Table of Contents
