Table of Contents
Advertisement
Chapter 3 - Home Gateway Utilities
Firmware Upgrade
This page reports the Flash Code (Firmware) version installed in the
SpaceLink Home Gateway. Periodically, a new Flash Code is available for
the SpaceLink Home Gateways on ASUS's Web site. You can update the
SpaceLink Home Gateway's Flash Code using the Firmware Upgrade page
under the Advanced Setup menu of the Web Manager. If you are
experiencing a problem with your SpaceLink equipment, a Technical
Support representative may ask you to report the device's Flash Code
(Firmware) version.
The firmware upgrade takes approximately 60 to 90 seconds. When the
firmware upgrade is completed, you will be directed to the home page.
SpaceLink Home Gateway
53
Advertisement
Table of Contents
