Chapter 3 - Home Gateway Utilities
Restoring Factory Default Settings
Web Manager
You can reset all settings to their factory defaults through the web manager
using the "Factory Default" page in "Advanced Setup". Click the Restore
button and wait about 30 seconds before trying to access the SpaceLink
Home Gateway.
Hardware
You can reset all settings to their factory defaults manually by pushing the
"Restore" button in a hole on the back of the SpaceLink Home Gateway
while it is ON. Use a pen or straightened paper clip to hold the "Restore"
button depressed over 5 seconds until all the LEDs on the front of the
SpaceLink Home Gateway start blinking. Release the button and the
SpaceLink Home Gateway will reboot.
You will be notified
when
factory
default settings
are restored while
using the web
manager.
54
SpaceLink Home Gateway