Roland MC-808 Sound List page 41

41: TRIPLE TAP DELAY
Produces three delay sounds; center, left and right.
fig.MFX41
L in
Left Tap
Triple Tap Delay
Feedback
Right Tap
R in
Parameter Value
Delay Left/ 0–4000 ms,
Right/Center note
Feedback -98– +98 %
#1
HF Damp 200–8000
Hz, BY-
PASS
Left/Right/ 0–127
Center Level
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
42: QUADRUPLE TAP DELAY
This effect has four delays.
fig.MFX42a
L in
Delay 1
Feedback
Quadruple Tap Delay
Delay 4
R in
fig.MFX42b
Stereo location of each delay
2 3
1 4
R
L
Parameter Value
Delay 1–4 0–4000 ms,
note
Level 1–4 0–127
Feedback -98– +98 %
#1
HF Damp 200–8000
Hz, BY-
PASS
Balance #2 D100:0W–
D0:100W
Level 0–127
Balance D
2-Band
EQ
Balance W
Center Tap
Balance W
2-Band
EQ
Balance D
Description
Adjusts the time until the delay
sound is heard.
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Volume of each delay
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
Balance D
L out
Balance W
Delay 2
Delay 3
Balance W
R out
Balance D
Description
Adjusts the time until the delay
sound is heard.
Volume of each delay
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
43: MULTI TAP DELAY
This effect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can also
set the panning and level of each delay sound.
L out
fig.MFX43
L in
Feed
back
R out
R in
Parameter
Delay 1–4
Pan 1–4
Level 1–4
Feedback
#1
HF Damp
Low Gain
High Gain
Balance #2
Level
44: REVERSE DELAY
Adds the reverse of the input sound as a delay.
fig.MFX44
L in
Rev. Delay
Feedback 1
R in
Parameter
Threshold
Delay 1–4
Feedback 1
#1
Feedback 4
HF Damp 1
HF Damp 4
Pan 1–3
Level 1–3
Balance #2
Low Gain
High Gain
Level
Effects editing parameters
Balance D
Delay 1
Delay 3
Multi Tap Delay
Delay 4
Delay 2
Balance D
Value Description
0–4000 ms, Adjusts the time until Delays 1–4
note are heard.
L64–63R Stereo location of Delays 1–4
0–127 Output level of Delays 1–4
-98– +98 % Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you don't want to filter
out the high frequencies, set this pa-
rameter to BYPASS.
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct
D0:100W sound (D) and the effect sound (W)
0–127 Output level
D1 1
D2
Delay
2
D3
D4
3
Feedback 4
Value Description
0–127 Volume level at which the reverse
delay begins
0-2000 ms, Adjusts the time until Delays 1–4
note are heard.
-98– +98 % Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
L64–63R Stereo location of Delays 1–3 sound
0–127 Output level of Delays 1–3 sound
D100:0W– Volume balance between the direct
D0:100W sound (D) and the effect sound (W)
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
0–127 Output level
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
2-Band
L out
EQ
2-Band
R out
EQ
41