Roland MC-808 Sound List page 34

Effects editing parameters
19: SPACE-D
This is a multiple chorus that applies two-phase modulation in
stereo. It creates no audible modulation, yet produces a transparent
chorus effect.
fig.MFX19
Balance D
L in
Space D
Space D
R in
Balance D
Parameter Value
Pre Delay 0.0–100.0
ms
Rate #1 0.05–10.00
Hz
Depth 0–127
Phase 0–180 deg
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
20: STEREO CHORUS
This is a stereo chorus. A filter is provided so that you can adjust the
timbre of the chorused sound.
fig.MFX20
Balance D
L in
Chorus
Chorus
R in
Balance D
Parameter Value
Filter Type OFF, LPF,
HPF
Cutoff Freq 200–8000
Hz
Pre Delay 0.0–100.0
ms
Rate #1 0.05–10.00
Hz
Depth 0–127
Phase 0–180 deg
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
34
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the chorus sound
(W)
Output level
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Type of filter
OFF: no filter is used
LPF: cuts the frequency range
above the Cutoff Freq
HPF: cuts the frequency range
below the Cutoff Freq
Basic frequency of the filter
Adjusts the time until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the chorus sound
(W)
Output level
21: STEREO FLANGER
This is a stereo flanger. It produces a metallic resonance that rises
and falls somewhat like a jet airplane taking off or landing. A filter is
provided so that you can adjust the timbre of the flanged sound.
fig.MFX21
Balance D
L in
Flanger
Feedback
Feedback
Flanger
R in
Balance D
Parameter Value
Filter Type OFF, LPF,
HPF
Cutoff Freq 200–8000
Hz
Pre Delay 0.0–100.0
ms
Rate #1 0.05-10.00
Hz, note
Depth 0–127
Phase 0–180 deg
Feedback -98– +98 %
#2
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance D100:0W–
D0:100W
Level 0–127
22: STEP FLANGER
This is a flanger in which the flanger pitch changes in steps. The
speed at which the pitch changes can also be specified in terms of a
note value based on a specified tempo.
fig.MFX22
Balance D
L in
Step Flanger
Feedback
Feedback
Step Flanger
R in
Balance D
Parameter Value
Pre Delay 0.0–100.0
ms
Rate 0.05–10.00
Hz, note
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Type of filter
OFF: no filter is used
LPF: cuts the frequency range
above the Cutoff Freq
HPF: cuts the frequency range
below the Cutoff Freq
Basic frequency of the filter
Adjusts the time until the flanger
sound is heard.
Frequency of modulation
Depth of modulation
Spatial spread of the sound
Adjusts the amount of the flanger
sound that's fed back into the effect.
Negative (-) settings invert the
phase.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the flanger sound
(W)
Output level
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the time until the flanger
sound is heard.
Frequency of modulation