General Information - Elation PROTEUS HYBRID WMG User Manual

Hide thumbs Also See for PROTEUS HYBRID WMG:
Table of Contents

Advertisement

GENERAL INFORMATION

INTRODUCTION
Please read and understand the instructions in this manual carefully and thoroughly before
attempting to operate this device. These instructions contain important safety and use
information. This product is intended to be used by professionally trained personnel only, and
is not suitable for private use.
COOLING
After usage, the lamp may be switched off, but the fixture should remain connected to power
to allow the fan time to cool down the fixture.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect operating condition.
Carefully check the shipping carton for damage that may have occurred during shipping. If the
carton is damaged, carefully inspect the device for damage, and be sure all accessories
necessary to install and operate the device have arrived intact. In the event damage has been
found or parts are missing, please contact our customer support team for further instructions.
Please do not return this device to your dealer without first contacting customer support.
Please do not discard the shipping carton in the trash. Please recycle whenever possible.
BOX CONTENTS
Omega Brackets (x2)
IP65 Rated 5pin DMX Cable
IP65 Rated RJ45 Cable (Fixture to Fixture Interconnect Use Only!)
IP65 Power Cable
CUSTOMER SUPPORT
Contact ELATION Service for any product related service and support needs. Also visit
forums.elationlighting.com
with questions, comments, or suggestions.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
support@elationlighting.com
323-582-3322 | Fax 323-832-9142 |
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 546 85 96 |
support@elationlighting.eu
REPLACEMENT PARTS please visit
parts.elationlighting.com
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proteus hybridPrh021

Table of Contents