Table of Contents
Advertisement
Using the Controllers
Changing the Sound with Aftertouch
After pressing keys on the upper manual, you can then alter the sound of the Organ
and Orchestral Tones by continuing to press harder on the keys.
The function of aftertouch is as follows.
Tone
Organ Voice
ORCHESTRAL TONES
Changing the Pedal and MODULATION Lever
Functions ([ORGAN CONTROL] Button)
Pressing the [ORGAN CONTROL] button, which causes the button to light up,
allows you to use the BENDER or MODULATION lever to change the Organ tones.
1
Press the [ORGAN CONTROL] button to make its indicator light.
2
Set the organ tone.
3
Move the BENDER or MODULATION lever.
When the [ORGAN CONTROL] button is lit, the Bender and Modulation lever
function as shown below.
Bender
Tone
Organ Voice
ORCHESTRAL TONES
Modulation Lever
Tone
Organ Voice
ORCHESTRAL TONES
62
Apply pressure to the keyboard
Function
The function assigned to aftertouch is enabled.
The tone is changed.
Function
You can switch the rotary speed of rotary effect.
Tilting the lever either to the left or right changes
the rotary effect's rotation speed.
The Bender is disabled.
Function
You can use the function assigned to the
MODULATION lever.
The MODULATION lever is disabled.
The effect may be difficult to
perceive with certain types of
tones.
You can change the function
the Aftertouch performs
(p. 69).
You can set the Rotary effect so
it won't be switched when the
[ORGAN CONTROL] button
is on, even when the BENDER
is moved (p. 70).
You can change the function
the MODULATION Lever
performs when the [ORGAN
CONTROL] button is on (p.
70).
NOTE
When the [ORGAN
CONTROL] button is lit, the
BENDER and MODULATION
lever have no effect on the
Orchestral Tones.
When the [ORGAN
CONTROL] button is off,
BENDER and MODULATION
lever messages are transmitted
to the external MIDI device.
Advertisement
Table of Contents
