Adding Ambience (Reverb)
Reverb is an effect that adds reverberation to the sound. You can apply the reverb
effect to the organ sound and the ORCHESTRAL TONES.
fig.01-33
1
Turn the REVERB [LEVEL] knob to adjust the amount of reverb effect to
be applied.
Rotate fully right: Maximum reverberation.
Rotate fully left: No effect.
Changing the Reverb Type
By changing the reverberations of the notes, you can enjoy the atmosphere of
performance in a wide variety of different locations.
2
Press the [REVERB] button to switch the reverb types.
The reverb type will be switched each time you press the [REVERB] button.
Type
ROOM
HALL
CHURCH
SPRING
1
2
Explanation
Simulates the reverberation of a room.
Simulates the reverberation of a large concert hall.
Simulates the reverberation of a church.
Simulates the reverberation of a spring reverb unit (p. 43).
Playing the Organ
NOTE
Note that assigning the
"Spring Shock" function to the
D BEAM controller, control
pedal, aftertouch, or
Modulation lever increases the
reverb level, producing a very
loud shock sound.
When the "Spring Shock"
function is selected with the D
BEAM controller, control
pedal, aftertouch, or
Modulation lever (p. 42, 57),
you can use the [REVERB]
knob to adjust the Spring
Shock volume.
45