Pushing or Towing the
Machine
Important: In an emergency, you can tow the machine
for a short distance. Do not tow the machine at faster
than 3 to 4 km/h (2 to 3 mph); otherwise, you may
damage the drive system. If you must move the machine
a considerable distance, transport it on a truck or trailer.
1. Locate the bypass valve on the pump and rotate it 90°
(Figure
24).
1. Bypass valve
2. Before starting the engine, close the bypass valve by
rotating it 90° (1/4 turn).
Important: Do not start the engine when the valve
is open, as this may cause damage.
Figure 24
g031610
30