Lubrication
Greasing the Bearings and
Bushings
Service Interval: Every 50 hours—Lubricate all of the
bearings and bushings.
Every 500 hours/Yearly (whichever comes first)
The machine has grease fittings that you must lubricate
regularly with No. 2 lithium grease. Also, lubricate the
machine immediately after every washing.
The grease fitting locations and quantities are as follows:
•
Rear cutting-unit pivot
Figure 28
•
Front cutting-unit pivot
Figure 29
•
2 sidewinder-cylinder ends
(Figure
28)
(Figure
29)
(Figure
30)
•
Steering pivot
g008894
•
2 rear lift-arm pivots and lift cylinder
g008895
35
Figure 30
(Figure
31)
Figure 31
(Figure
g008896
g195307
32)