Using Effects; Using Effects With A Patch; Using Effects With A Performance - Roland Fantom X6 User Manual

Using effects

The Fantom-X provides five effects processors; multi-effect (MFX), chorus,
reverb, mastering and input effect.

Using effects with a patch

In the Patch mode screen, press the [EFFECTS] button to view a diagram that shows how the effects
processors are connected. This shows at a glance the effect types and routing for the patch you are now
playing.
fig.2-10
Routing screen

Using effects with a performance

In the Performance mode screen, press the [EFFECTS] button to view a diagram that shows how the effect
processors are connected. Here you can use up to three multi-effects processors, and even connect them in
series. Performance mode is also a good choice if you want to use several effects to create your sound.
fig.2-11
44
All instrumental sounds are being sent to MFX-1.
You'll need to make special settings if you want the patches to use the same effect settings
as in Patch mode.
→ "MFX1–3 Source (Multi-Effects 1 Source)" (p. 212) in Owner's Manual
MFX-1->OUTPUT A
Send level
MFX-1->Chorus
Send level
MFX-1->Reverb
Send level
The signal sent from
OUTPUT A combines:
• The direct sound from MFX-1
• The sound sent from Chorus
• The sound sent from Reverb