Lexmark MX826 User Manual page 31

Loading paper and specialty media
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator.
•
Load letterhead depending on whether an optional staple finisher is installed or not.
•
When loading prepunched paper, make sure that the holes on the long edge of the paper are against
the right side of the tray.
Without an optional staple finisher With an optional staple finisher
One‑sided printing
Two‑sided printing
One‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
31