Honda TALON SXS1000S4X 2022 Owner's Manual page 177

Air Cleaner
5. Remove the housing seal from the air cleaner housing.
screws B/collars
screws A
screws B/collars
6. Install a new housing seal into the seal groove of the air cleaner
housing.
7. Insert a new air cleaner into the air cleaner housing. Make sure
that the air cleaner is properly seated in the air cleaner housing.
8. Install the collars and screws B and tighten the screws A and
screws B to the specified torque:
3.7 lbf·ft (5 N·m, 0.5 kgf·m)
9. Install a new cover seal into the seal groove of the air cleaner
housing cover.
10. Install the air cleaner housing cover and latch the retainer clips.
11. Install the air cleaner outer cover.
168 Servicing Your Honda
air intake ducts
air cleaner
housing
air cleaner
housing
seal