Rear Final Gear Oil
Oil Recommendation
API classification
type
viscosity (weight)
suggested oil
Checking Oil
Refer to Safety Precautions on page 117.
1. Park your Honda SXS on a firm, level surface. Shift the shift select
lever into the park (P) position.
2. Remove the oil check bolt and sealing washer.
3. Make sure the oil level is at the lower edge of the oil check
inspection hole.
4. Install the oil check bolt with a new sealing washer and tighten to
the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
RIGHT REAR
158
Servicing Your Honda
GL-5
hypoid gear oil
SAE 80W-90
Honda shaft drive oil or equivalent
sealing washer
lower edge of oil
check inspection
hole
oil check bolt