Honda TALON SXS1000S4X 2022 Owner's Manual page 169

Rear Final Gear Oil
7. Install the oil check bolt with a new sealing washer and tighten to
the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
8. Apply a thin coat of grease to a new O-ring, and insert it into the
oil fill cap groove.
9. Install and tighten oil fill cap to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
10. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 223).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
RIGHT REAR
lower edge of oil
check inspection
hole
160 Servicing Your Honda
sealing washer
oil check bolt
oil fill cap/O-ring
sealing
washer
oil drain
plug