Yamaha XJ6 2008 Owner's Manual page 78

PERIODIC MAINTENANCE AND ADJUSTMENT
2. Remove the multi-function meter
unit bolts, and then lift up the meter
to unhook its projections from the
slots in the meter stay.
1
1. Multi-function meter unit
2. Bolt
7
1. Projection
2. Slot
3. Remove the headlight unit by re-
moving the bolts.
2
2
1
1. Headlight unit
2. Bolt
4. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1
2
1. Headlight bulb cover
2. Headlight coupler
7-34
5. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
2
1. Headlight bulb holder
2. Headlight bulb
6. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
1
7. Install the headlight bulb cover,
and then connect the coupler.
8. Fit the projection on the headlight
unit into the grommet in the head-
light stay, and then install the
2
headlight unit by installing the
bolts.
1
2