Adjusting The Engine Idling Speed - Yamaha XJ6 2008 Owner's Manual

Table of Contents

Advertisement

5. Insert a new air filter element into
the air filter case. NOTICE: Make
sure that the air filter element is
properly seated in the air filter
case. The engine should never
be operated without the air filter
element installed, otherwise the
piston(s) and/or cylinder(s) may
become
excessively
[ECA10481]
6. Install the air filter case cover by in-
stalling the screws.
7. Place the fuel tank in its original
position. Make sure that the fuel
hoses are properly connected and
routed, and are not pinched. Be
sure to place the hoses in their
original position. WARNING! Be-
fore placing the fuel tank in the
original position, make sure that
all hoses (i.e., fuel hose, fuel
tank breather hose, fuel tank
overflow hose) are not dam-
aged, that they are properly con-
nected and routed, and that they
are not pinched. If any hose is
damaged, have a Yamaha dealer
replace the hose before starting
PERIODIC MAINTENANCE AND ADJUSTMENT
the engine, otherwise fuel may
leak, creating a fire hazard.
[EWA12463]
worn.
1
1. Hose
1. Original position (paint mark)
8. Install the fuel tank bolts.
9. Install the seat.
Adjusting the engine idling
speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
Check the engine idling speed and, if
necessary, adjust it to specification by
turning the idle adjusting screw. To in-
crease the engine idling speed, turn the
screw in direction (a). To decrease the
engine idling speed, turn the screw in
direction (b).
1
1. Idle adjusting screw
7-17
EAU34301
7
1
(a)
1
(b)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xj6ny 2008

Table of Contents