Yamaha XJ6 2008 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
The multi-function
equipped with the following:
G a speedometer
G a tachometer
G an odometer
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the left segment of the fuel meter
4
started flashing)
G
a clock
G
a fuel meter
G
a coolant temperature display
G a self-diagnosis device
TIP
Be sure to turn the key to "ON" before
using the "SELECT" and "RESET" but-
tons.
meter unit is Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11666 r/min and above
Clock
1
1
2
1. Clock
The clock displays when the key is
turned to "ON". In addition, the clock
can be displayed for 10 seconds by
pushing the "SELECT" button when the
main switch is in the "OFF", "LOCK"
or "
To set the clock
1. Turn the key to "ON".
ECA10031
2. Push the "SELECT" button and
3. When the hour digits start flashing,
4. Push the "SELECT" button, and
4-8
" position.
"RESET" button together for at
least two seconds.
push the "RESET" button to set the
hours.
the minute digits will start flashing.