Camshaft End Play; Gr 1 And Gr 2 Hydraulic Pump 3Rd P.t.o; Hydraulic Pump P.t.o - Kohler LAMBARDDINI LDW 1503 Workshop Manual

4
117
118
119
- 66 - - 66 -
Disassembly / Reassembly
Workshop Manual LDW CHD _ cod.

Camshaft end play

Check camshaft end play after removing the cylinder head, the
injection and the fuel pumps from the engine.
Check that plate 1 is tightened.
Position the dial gauge on the camshaft front surface; push and
pull the camshaft.
Maximum end play should be 0,008 mm (ball bearing end play).

Hydraulic pump p.t.o.

A = 3rd p.t.o. with hydraulic pump Gr 2.
B = 4th p.t.o. with hydraulic pump Gr 1
Hydraulic pumps of either GR 1 or GR 2 type can be fitted, even
simultaneously, on the erd and 4th p.t.o. provided the resulting
torque does not exceed 40 Nm.
The gear ratio between engine r.p.m. and 3rd and 4th p.t.o. is
1:1.

GR 1 and GR 2 hydraulic pump 3rd p.t.o.

1 O-R
2 O-R
3 Center ring
4 Circlip
5 Thrust washer
6 GR 2 hydraulic pump flange
7 GR 1 hydraulic pump flange
8 Bushing
9 Trust washer
10 GR 2 hydraulic pump drive gear
11 GR 1 hydraulic pump drive gear
12 Control gear
ED0053031210 - 1° ed_rev. 00