Advertisement
3.1 Projector Web Control (continued)
3.1.6 Alert Settings
Confi gures notifi cations of errors/warnings.
Refer to chapter "8.1 E-mail Alerts" for the details of the above errors/warnings.
When changing the settings, click the [Apply] button to refl ect the settings of the
projector.
This setting can be restored to the initial setting when clicking the [Reset] button.
Item
Alarm Time *1
SNMP Trap *2
Send Mail
Mail Subject *3
Mail Text *4
*1 Only Lamp Time Alarm and Filter Time Alarm.
*2 The setting item of Cold Start and Authentication Failure is SNMP Trap only.
*3 The text length can be up to 100 alphanumeric characters and symbols. Using
any Multi-byte character may shorten the text. Only symbols "!"#$%&'()*+,-
./:;<=>?@[\]^_'{|}~ and space" can be used.
*4 The text length can be up to 1024 alphanumeric characters and symbols. Using
any Multi-byte character may shorten the text. Only symbols "!"#$%&'()*+,-
./:;<=>?@[\]^_'{|}~ and space" can be used.
Confi gures the time to alert.
Click the [Enable] check box to enable SNMP Trap
alerts.
Click the [Enable] check box to enable e-mail alerts.
Confi gures the subject line of the e-mail to be sent.
Confi gures the text of the e-mail to be sent.
Description
3. Web Control
51
Advertisement
